 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AD2C101 1 Form A Solid State Relay DESCRIPTION The AD2C101 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The relay consists of an IR LED optically coupled to a Photo Diode Array, which in turn drives two output MOSFETs. The AD2C101 provides high load voltage (600V) and high input-to-output isolation (5kV) in a miniature 4 pin DIP / SMD package, making it ideal for high-density board applications. FEATURES APPLICATIONS * * * * * * High Blocking Voltage (600V) Small 4-pin DIP / SMD package High input-to-output isolation (5000Vrms) 100mA maximum continuous load current 40 ohms maximum on-resistance Long life/high reliability * * * * * * Multiplexers Meter reading systems Data Acquisition Medical equipment Battery monitoring Home/Safety security systems OPTIONS/SUFFIXES* ABSOLUTE MAXIMUM RATINGS* PARAMETER Storage Temperature Operating Temperature Continuous Input Current Transient Input Current (1us) Reverse Input Control Voltage Output Power Dissipation UNIT C C mA mA V mW C C MIN -40 -40 TYP MAX 150 85 50 400 5 500 260 260 * * * -S -TR -V Surface Mount Option (65 pcs / tube) Tape and Reel Option (2000 pcs / reel) .04" (10.16mm) lead spacing (VDE0884) NOTE: Suffixes listed above are not included in marking on device for part number identification. SCHEMATIC DIAGRAM + INPUT 1 4 LOAD Solder Temperature Wave (10s) Solder Temperature - IR Reflow (10s) 2 - INPUT 3 LOAD *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. APPROVALS * UL / C-UL Approved: File E201932 (c) 2008 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 1 of 5 AD2C101 rev 1.42 (5/15/2008) AD2C101 1 Form A Solid State Relay ELECTRICAL CHARACTERISTICS - 25C PARAMETER INPUT SPECIFICATIONS LED Forward Voltage Turn-On Current Turn-Off Current V mA mA 0.2 1.8 2.5 2 5 If = 10mA Io = 100mA UNIT MIN TYP MAX TEST CONDITIONS OUTPUT SPECIFICATIONS Blocking Voltage Continuous Load Current On-Resistance Leakage Current Output Capacitance Offset Voltage V mA A pF mV 6 0.2 30 0.2 600 100 40 1 Io = 1uA If = 5mA Io = 100mA Vo = 600V If=0, f = 1.0MHz If = 5mA COUPLED SPECIFICATIONS Isolation Voltage Turn-On Time Turn-Off Time Isolation Resistance Coupled Capacitance Contact Transient Ratio Vr ms ms ms G pF V/ s 2000 100 3 7000 dV = 50V 5000 1 0.05 5 3 T = 1 minute If = 5mA, Io = 100mA, Vo=20V, t=10ms If = 0mA, Io = 100mA, Vo=20V, t=10ms (c) 2008 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 2 of 5 AD2C101 rev 1.42 (5/15/2008) AD2C101 1 Form A Solid State Relay PERFORMANCE DATA AD2C101 Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25C AD2C101 Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25C 50 Device Count 40 30 20 10 0 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 Turn-On Tim e (m s) 50 Device Count 40 30 20 10 0 0.04 0.04 0.04 0.04 0.05 0.05 0.05 0.05 Turn-Off Tim e (m s) AD2C101 Typical On-Resistance Distribution N = 100, Ambient Temperature = 25C AD2C101 Typical Leakage Current Distribution N = 100, Ambient Temperature = 25C 40 Device Count Device Count 27 28 29 30 31 32 33 34 30 20 10 0 On-Resistance (ohm s) 50 40 30 20 10 0 0.04 0.04 0.04 0.05 0.05 0.05 0.05 0.06 Leakage Current (uA) AD2C101 Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25C AD2C101 Maximum Load Current vs. Temperature 40 30 20 10 0 600 610 620 630 640 650 660 670 Blocking Voltage (V) Load Current (mA) 50 Device Count 120 100 80 60 40 20 0 40 60 -4 0 -2 0 20 80 0 Tem perature (C) (c) 2008 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 3 of 5 AD2C101 rev 1.42 (5/15/2008) AD2C101 1 Form A Solid State Relay MECHANICAL DIMENSIONS 4 PIN DUAL IN-LINE PACKAGE 4 PIN SURFACE MOUNT DEVICE END VIEW END VIEW TOP VIEW TOP VIEW BOTTOM VIEW BOTTOM VIEW (c) 2008 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 4 of 5 AD2C101 rev 1.42 (5/15/2008) AD2C101 1 Form A Solid State Relay DISCLAIMER Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. (c) 2008 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600 Page 5 of 5 AD2C101 rev 1.42 (5/15/2008) |
Price & Availability of AD2C101
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |